Nikon S4400 Manuel D’Utilisation

E

Refere

The following table lists the error messages and other warnings displayed in the 
monitor, as well as the solutions for dealing with them.

Display

Cause/Solution

A

O (flashes)

Clock not set.
Set date and time.

Battery exhausted.

Charge or change battery.

16, 18

Battery temperature 
high

Battery temperature is high.
Turn off camera, and allow battery to cool down before 
resuming use. After five seconds, the monitor will turn 
off, and the power-on lamp will flash quickly. After the 
lamp flashes for three minutes, the camera will turn off 
automatically. Pressing the power switch also turns off 
the camera.

The camera will turn 
off to prevent 
overheating.

The camera has become hot.
The camera turns off automatically. Leave the camera 
off until it has cooled and then turn it on again.

Q (

● flashes red)

Camera cannot focus.
• Refocus.
• Focus on another subject positioned at the same 

distance from the camera as the intended subject.

30, 31
40

Please wait for the 
camera to finish 
recording.

Camera cannot perform other operations until saving is 
complete.
Wait until message clears from display automatically 
when recording is complete.

–

Memory card is write 
protected.

Write-protect switch is in “lock” position.
Slide write-protect switch to “write” position.

–

Not available if Eye-Fi 
card is locked.

Write-protect switch of Eye-Fi card is in “lock” position.
Slide the write-protect switch to “write” position.

–

Error accessing Eye-Fi card.
• Check that connectors are clean.
• Confirm that memory card is correctly inserted.