Nikon D3x Manuel D’Utilisation

191

l

The following flash units can be used in non-TTL auto and manual 
modes.  If they are set to TTL, the camera shutter-release button 
will lock and no photographs can be taken.

D

Refer to the Speedlight manual for detailed instructions.  If the Speedlight 
supports the Nikon Creative Lighting System, refer to the section on CLS-
compatible digital SLR cameras.  The D3X is not included in the “digital 
SLR” category in the SB-80DX, SB-28DX, and SB-50DX manuals.

i-TTL flash control can be used at ISO sensitivities between 100 and 1600. 
At values over 1600, the desired results may not be achieved at some 
ranges or aperture settings.  If the flash-ready indicator blinks for about 
three seconds after a photograph is taken, the flash has fired at full power 
and the photograph may be underexposed.

Non-TTL auto

✔

—

✔

—

Manual

✔

✔

✔

✔

G Repeating flash

✔

—

—

—

Rear-curtain sync

✔

✔

✔

✔

1 Flash mode is automatically set to TTL and shutter-release is disabled. Set flash 

unit to A (non-TTL auto flash).

2 Autofocus is only available with AF-Micro lenses (60 mm, 105 mm, or 200 mm).