Nikon S9300 Manuel D’Utilisation

Page de 244
16
Th
Bas
ics of Shoo
ting and
 Pl
a
y
b
a
ck
Preparation 2 Charge the Battery
1
Prepare the included Charging AC Adapter EH-69P.
If a plug adapter* is included with your camera, attach the 
plug adapter to the plug on the Charging AC Adapter. Push 
the plug adapter firmly until it is securely held in place. Once 
the two are connected, attempting to forcibly remove the 
plug adapter could damage the product.
* The shape of the plug adapter varies according to the 
country or region in which the camera was purchased.
The Charging AC Adapter comes with the plug adapter 
attached in Argentina and Korea.
2
Make sure the battery is inserted in the camera, and then connect the 
camera to the Charging AC Adapter in order of 
1
 to 
3
.
• Keep the camera turned off.
• When connecting the cable, be sure that the plug is properly oriented. Do not use 
force when connecting the cable to the camera. When disconnecting the cable, do 
not pull the plug at an angle.
• When charging starts, the charge lamp flashes slowly in green.
• About three hours and 50 minutes is required to charge a fully exhausted battery.
• When the battery has been completely charged, the charge lamp turns off.
• See “Understanding the Charge Lamp” (
A17) for more information.
3
Disconnect the Charging AC Adapter from the electrical outlet and 
then disconnect the USB cable.
• When the camera is connected to an electrical outlet with the Charging AC Adapter, 
the camera cannot be turned on.
Charge lamp
Electrical outlet
USB Cable UC-E6 (included)