Nikon COOLPIXS80BK Manuel D’Utilisation

Connecting to a Computer

Con

n

e

cti

ng t

o

 Te
le

vi

sion
s, Comp

u

te

rs

 a

n

d 

Pr

in

te

rs

When the Charge by computer option (

set to Auto (default setting), if the camera is connected to a computer using the 
USB cable, the battery inserted into the camera can be automatically charged 
depending on the ability of the computer to supply power.
See “Before Connecting the Camera” (

A 132) and “Transferring Images from a 

A 133) for more information on connecting the camera 

to a computer.

The following chart explains power-on lamp status when the camera is connected 
to a computer.

B

• The battery cannot be charged, nor can data be transferred, when the camera is connected to a 

computer before the camera’s display language and date and time have been set (

A 20). If the 

camera’s clock battery (

A 149) has been exhausted, the date and time must be reset before the battery 

can be charged or images can be transferred with connection to a computer. In this case, use the 
Charging AC Adapter EH-68P (

A 16) to charge the battery and then set the camera’s date and time. 

• If the camera is turned off by opening and closing the slide cover, charging will also stop.
• If a computer enters sleep mode while charging, charging will stop and the camera may be turned off.
• When disconnecting the camera from a computer, turn the camera off by opening and closing the 

slide cover and then disconnect the USB cable.

• About 3 hours are required to charge a fully exhausted battery. Charging time increases when 

images are transferred while the battery is charging.

• When the camera is connected to a computer, an application installed on the computer, such as 

Nikon Transfer 2, may start. If the camera was connected to the computer for the sole purpose of 
charging the battery, exit the application.

• The camera turns off automatically if there is no communication with the computer for 30 minutes 

after the battery has finished charging.

• Depending upon computer specifications, settings, and power supply and allocation, it may be 

impossible to charge the battery inserted into the camera via computer connection.

Power-on lamp

Description

Blinks slowly 
(orange)

Battery charging.

Glows (green)

Battery not charging. Charging is complete when the power-on lamp 
stops blinking orange and glows green.

Flickers (orange)

• The ambient temperature is not suited to charging. Charge the battery 

indoors with an ambient temperature of 5 °C to 35 °C (41 °F to 95 °F).

• A USB cable is not correctly connected or the battery is faulty. 

Reconnect the USB cable correctly or replace the battery.

• Computer is in sleep mode and does not supply power. Reboot a computer.
• The battery cannot be charged as computer’s specifications or 

settings does not support power supply to the camera.