Nikon SB2G03(11) Manuel D’Utilisation
Q
263
Q
Connections
This section describes how to use the supplied UC-E15 USB cable
to connect the camera to a computer.
to connect the camera to a computer.
Before Connecting the Camera
Before connecting the camera, install the software on the supplied
ViewNX 2 installer CD. To ensure that data transfer is not
interrupted, be sure the camera EN-EL18 battery is fully charged. If
in doubt, charge the battery before use or use an EH-6b AC
adapter and EP-6 power connector (available separately).
ViewNX 2 installer CD. To ensure that data transfer is not
interrupted, be sure the camera EN-EL18 battery is fully charged. If
in doubt, charge the battery before use or use an EH-6b AC
adapter and EP-6 power connector (available separately).
❚❚Supplied Software
ViewNX 2 includes a
“Nikon Transfer 2” function for
copying pictures from the
camera to the computer,
where ViewNX 2 can be used
to view and print selected
images or to edit photographs and movies. Before installing
ViewNX 2, confirm that your computer meets the system
requirements on page 266.
“Nikon Transfer 2” function for
copying pictures from the
camera to the computer,
where ViewNX 2 can be used
to view and print selected
images or to edit photographs and movies. Before installing
ViewNX 2, confirm that your computer meets the system
requirements on page 266.
Connecting to a Computer
Your Imaging Toolbox