Nikon SB2G03(11) Manuel D’Utilisation

336

U

This option controls the operation of the main and sub-command 
dials.

G button

➜ A Custom Settings menu

Reverse the direction of rotation of the 
command dials when they are used to 
make adjustments to Exposure 
compensation and/or Shutter speed/
aperture. Highlight options and press 
2 to select or deselect, then highlight 
Done and press 

J. This setting also 

applies to the command dials for vertical shooting.

If Off is selected, the main command 
dial controls shutter speed and the sub-
command dial controls aperture. If On 
is selected, the main command dial will 
control aperture and the sub-command 
dial shutter speed. If On (Mode A) is 
selected, the main command dial will 
be used to set aperture in exposure mode g only. This setting 
also applies to the command dials for vertical shooting.

If Sub-command dial is selected, aperture can only be 
adjusted with the sub-command dial (or with the main 
command dial if On is selected for Change main/sub). If 
Aperture ring is selected, aperture can only be adjusted with 
the lens aperture ring and the camera aperture display will 
show aperture in increments of 1 EV (aperture for type G lenses 
is still set using the sub-command dial). Note that regardless of 
the setting chosen, the aperture ring must be used to adjust 
aperture when a non-CPU lens is attached.