Nikon P310 Mode D'Emploi

Re
fere

nce

ect
io

Using 3D Photography

The camera takes one picture for each eye to simulate a three-dimensional image
on a 3D-compatible TV or monitor.

Frame the subject.

• The focus area that the camera focuses on can be

moved to areas other than the center of the frame.
To move the focus area, press the

k button

before taking the first picture, and then rotate the
multi selector or press

H, I, J, or K.

To adjust the following settings, press the

button to temporarily cancel focus area selection,
and then adjust each setting.

– Focus mode (A (Autofocus) or

p (macro close-up))

– Exposure compensation

Press the shutter-release button to take the first picture.

• The focus, exposure and white balance are locked after the first shot,

and R is displayed on the monitor.

Move the camera horizontally to the right
until the translucent guide is aligned with
the subject.

• To cancel shooting, press the

k button.

Wait for the camera to automatically release the shutter.

• The camera automatically takes the second picture when it detects that the subject is

aligned with the guide.

• Shooting is canceled if the subject is not aligned with the guide within 10 seconds.

Rotate the mode dial to

y M d button M s 3D photography

6030

25m 0s

1/250

F5.6

F2.8

Cancel