Nikon COOLPIXS80RD Manuel D’Utilisation
177
T
e
ch
n
ical
No
No
te
s an
d I
n
n
de
x
x
Troubleshooting
If the camera fails to function as expected, check the list of common problems
below before consulting your retailer or Nikon-authorized service representative.
below before consulting your retailer or Nikon-authorized service representative.
Display, Settings and Power Supply
Problem
Cause/Solution
A
Monitor is blank
• Camera is off.
• Battery is exhausted.
• Standby mode for saving power: press the
• Battery is exhausted.
• Standby mode for saving power: press the
shutter-release button halfway.
• Camera and computer are connected via the
USB cable.
• Camera and TV are connected via audio/video
cable or HDMI cable.
• When connecting to an electrical outlet using
a Charging AC Adapter, the camera cannot be
turned on.
turned on.
Monitor is hard to read/has
darkened
darkened
• Adjust monitor brightness.
• When the internal temperature of the camera
• When the internal temperature of the camera
is high, the monitor darkens to reduce heat
generation. When internal temperature cools,
the monitor brightens again.
generation. When internal temperature cools,
the monitor brightens again.
• When the power-on lamp is covered after the
camera has automatically increased monitor
brightness, the monitor may darken.
brightness, the monitor may darken.
• Monitor is dirty. Clean monitor.
151
–
–
–
Camera turns off without
warning
warning
• Battery is exhausted.
• If connecting the Charging AC Adapter while
• If connecting the Charging AC Adapter while
the camera is on, the camera is turned off.
• The USB cable connecting the camera to the
computer or printer has been disconnected.
Reconnect the USB cable.
Reconnect the USB cable.
• The internal temperature of the camera or the
memory card is high. Allow the camera and
memory card to cool and turn on the camera
again.
memory card to cool and turn on the camera
again.
• The camera and battery may not work
properly at low temperatures.