Nikon COOLPIXL120BLK Manuel D’Utilisation

Setup Menu

Basi

c Came

ra Setup

If no operations are performed for a specified amount of time, the monitor turns 
off and the camera enters standby mode (

Use this option to set the amount of time that passes before the camera enters 
standby mode.

d button M z (Setup menu) (A 104) M Auto off

Auto off

Choose the time allowed to elapse before the camera enters standby mode if no 
operations are performed from 30 s (default setting), 1 min, 5 min, and 30 min.

Sleep mode

If On (default setting) is selected, the camera will enter standby mode when there 
is no change in the brightness of the subject, even before the time selected in the 
auto off menu has elapsed. The camera will enter sleep mode after 30 seconds 
when Auto off is set to 1 min or less, or after 1 minute when Auto off is set to 
5 min or more.

C

• When the camera is in standby mode, the power-on lamp blinks.
• If no operations are performed for another three minutes, the camera will turn off automatically.
• When the power-on lamp is blinking, pressing the following buttons will turn the monitor back on.

➝ Power switch, shutter-release button, A button, c button, or b (e movie-record) button

C

The time allowed to elapse before the camera enters standby mode is fixed in the following 
situations:

• While menus are displayed: 3 minutes
• During slide show playback: Up to 30 minutes