Nikon COOLPIXS9100RED Manuel D’Utilisation

T

e

ch

n

ical
 No

te

s an

d I
n

de
x

The following table lists the error messages and other warnings displayed in the 
monitor, as well as the solutions for dealing with them.

Display

Problem

Solution

A

O (blinks)

Clock not set.

Set date and time.

N
Battery exhausted.

Battery exhausted.

Charge or replace the battery.

P
Battery temperature 
high

Battery temperature is 
high.

Turn off camera, and allow 
battery to cool down before 
resuming use. After five 
seconds, this message will 
disappear, the monitor will 
turn off, and the power-on 
lamp will blink rapidly. After 
the lamp blinks for three 
minutes, the camera will turn 
off automatically. Pressing the 
power switch also turns off 
the camera.

P
The camera will turn 
off to prevent 
overheating.

Memory card or inside 
of camera has become 
hot.

The camera turns off 
automatically. Leave the 
camera off until the memory 
card or the inside of the 
camera has cooled and then 
turn it on again.

–

Q (

● blinks red)

Camera cannot focus.

• Refocus.
• Use focus lock.

28, 29
55

P
Please wait for the 
camera to finish 
recording.

Camera cannot perform 
other operations until 
saving is complete.

Wait until message clears 
from display automatically 
when saving is complete.

–

u
Memory card is write 
protected.

Write-protect switch is 
in “lock” position.

Slide write-protect switch to 
“write” position.

P
This card cannot be 
used.

Error accessing memory 
card.

• Use approved card.
• Check that terminals are 

clean.

• Confirm that memory card 

is correctly inserted.

198
22

P
This card cannot be 
read.