Nikon 6MA03711-A Manuel D’Utilisation

Page de 170
9
First Steps
First Steps
Charging the Battery
The camera uses a rechargeable Nikon EN-EL7 lithium-ion battery (supplied).  
Charge the battery before fi rst use or when the battery is running low.
1
 Connect the power cable
Connect the power cable to the supplied MH-56 
battery charger (
햲) and insert the wall plug into a 
power outlet (
햳).  The CHARGE lamp will light to 
show that the charger is on (
햴).
2
 Charge the battery
Remove terminal cover and slide the EN-EL7 into 
the MH-56 terminals fi rst.  During charging, the 
CHARGE lamp shows battery status as follows:
CHARGE 
lamp
Description
Blinks Battery charging.
On
Battery fully charged.
Flickers
Battery error.  If ambient temperature is not 
5–35 °C (41–95 °F), wait until temperature is in 
this range before charging.  Otherwise unplug 
charger and remove battery immediately and 
take both devices to retailer or Nikon-autho-
rized service representative.
About two and a half hours are required to charge 
a fully depleted battery.
3
 Unplug the charger
Remove the battery and unplug the charger.
3
1
2
 The MH-56 Battery Charger
Before using the MH-56, read and follow the warnings and cautions on 
pages 
ii–iii
 of this manual.
The MH-56 is for use with EN-EL7 batteries.  Do not use with non-compatible batteries.  
The supplied power cable is intended solely for use with the MH-56 and is for domestic 
use only.  It may be necessary to purchase another cable for use abroad; consult with a 
local Nikon-authorized retailer or service representative.
CHARGE lamp starts 
blinking when 
battery is inserted.  
Charging is complete 
when lamp stops 
blinking.