Nikon CT1A01(11) Manuel D’Utilisation
35
Bas
ic Ph
otography an
d Pl
ayba
ck
: A
(Auto)
(Auto)
M
o
de
Taking Pictures with the Self-timer
The self-timer is useful for self-portraits or reducing the effects of camera shake
that occur when the shutter-release button is pressed. The timer can be set to ten
or two seconds. When using the self-timer, use of a tripod is recommended. Set
Vibration reduction (
that occur when the shutter-release button is pressed. The timer can be set to ten
or two seconds. When using the self-timer, use of a tripod is recommended. Set
Vibration reduction (
A 178) to Off in the setup menu (A 169) when using a
tripod to stabilize the camera during shooting.
1
Press the rotary multi selector
n (self-timer).
The self-timer menu is displayed.
2
Use the rotary multi selector to choose 10s or
2s and press the
2s and press the
k button.
10s (ten seconds): Use on important occasions, such as
weddings.
2s (two seconds): Use to prevent camera shake.
When a is selected, the camera uses face detection to
detect a human face, and then automatically releases the
shutter when a smile is detected (
weddings.
2s (two seconds): Use to prevent camera shake.
When a is selected, the camera uses face detection to
detect a human face, and then automatically releases the
shutter when a smile is detected (
When the shooting mode is the Pet portrait scene mode, Y (Pet portrait auto release)
is displayed (
is displayed (
A 74). The self-timer settings 10s and 2s cannot be used.
The mode selected for self-timer is displayed.
If a setting is not applied by pressing the
If a setting is not applied by pressing the
k button within a few seconds, the selection
will be canceled.
3
Frame the picture and press the
shutter-release button halfway.
shutter-release button halfway.
Focus and exposure will be set.
S elf-timer
F 3.5
F 3.5
1 / 2 5 0
1 / 2 5 0
10
10