Nikon COOLPIXS9100BLK Manuel D’Utilisation

Charging the Battery

First Ste

p

s

Press the power switch to turn on the camera. The 
power-on lamp (green) will light, and then the monitor 
will turn on (the power-on lamp turns off when the 
monitor turns on). To turn off the camera, press the 
power switch again. When the camera is turned off, the 
power-on lamp and the monitor will turn off.
• If the camera is turned off, hold down the 

c button to turn the camera on in 

playback mode (

C

If no operations are performed for a while, the monitor will turn off, the camera will enter standby 
mode, and the power-on lamp will blink. If no operations are performed for another three minutes, 
the camera will turn off automatically.

When the power-on lamp is blinking, the following operations will turn the monitor back on.

- Pressing the power switch, shutter-release button, 

c button, or b (e movie-record) button

- Rotating the mode dial

• In shooting or playback mode, the camera will enter standby mode in about one minute (default 

setting).

• The time allowed to elapse before the camera enters standby mode can be changed from the 

Auto off option (

A 184) in the setup menu (A 169).