Samsung L73 Mode D'Emploi
《61》
Before contacting a service centre
The images are unclear
ㆍA picture was taken of the subject without setting an appropriate macro mode
ㆍA picture was taken of the subject without setting an appropriate macro mode
→ Select an appropriate macro mode to take a clear image.
ㆍA picture was taken beyond the flash range
→ Take a picture within the flash range
ㆍThe lens is smudged or dirty
→ Clean the lens
The flash does not fire
ㆍFlash off mode has been selected
ㆍFlash off mode has been selected
→ Dis-engage flash off mode
ㆍThe camera mode can't use flash
→ Refer to the FLASH instruction (p.27)
Incorrect date and time is displayed
ㆍThe date and time have been set incorrectly or the camera has adopted the
ㆍThe date and time have been set incorrectly or the camera has adopted the
default settings
→ Reset the date and time correctly
The camera buttons do not operate
ㆍCamera malfunction
ㆍCamera malfunction
→ Remove and re-insert the battery and switch the camera on
A card error has occurred while the memory card is in the camera.
ㆍIncorrect memory card format
ㆍIncorrect memory card format
→ Re-format the memory card
The images don't play back
ㆍIncorrect file name (Violation of DCF format)
ㆍIncorrect file name (Violation of DCF format)
→ Do not change the image file name
Battery power quickly drains
ㆍThe Camera is being used in low temperatures
ㆍThe Camera is being used in low temperatures
→ Keep the camera in warm conditions (i.e. inside a coat or jacket) and only
take it out to take pictures
Camera does not take a picture when the Shutter button is pressed
ㆍThere is insufficient memory capacity
ㆍThere is insufficient memory capacity
→ Delete unnecessary image files
ㆍThe memory card has not been formatted
→ Format the memory card (p.56)
ㆍThe memory card is exhausted
→ Insert a new memory card
ㆍThe memory card is locked
→ Refer to [Card Locked!] error message
ㆍThe camera’s power is off
→ Turn the camera power on
ㆍThe battery is exhausted
→ Insert charged battery (p.12)
ㆍBattery is inserted incorrectly with the polarities reversed.
→ Insert the battery according to the polarity marks (+, -)
The camera suddenly stops working while in use
ㆍThe camera stopped due to a malfunction
ㆍThe camera stopped due to a malfunction
→ Remove /re-insert battery and switch the camera on