Ricoh 06578 Manuel D’Utilisation

3

55

Shooting

1

Press D in standby mode.

The Drive Mode screen appears.

2

Select Q and press B.

3

Select Q or R and press E.

The camera returns to standby mode.

The grip lamps blink.

When set to R, the number of blinking grip lamps changes 

in order from 3 to 0, according to the number of seconds 

remaining.

4

Press 0 halfway.

5

Point the remote control unit towards the remote 

control receiver on the front of the camera, and 

press the shutter release button on the remote 

control unit.

t Memo

• The maximum operating distance of the remote control unit is 

approx. 4 m from the front of the camera.

• To adjust focus with remote control, set in [19 AF with Remote 

Control] of the E3 menu.

• When using the Remote Control Waterproof O-RC1, the 

autofocus system can be operated with the q button on 

the remote control unit. The r button cannot be used.

1

Press D in standby mode.

The Drive Mode screen appears.

2

Select T and press B.

3

Set the bracket value.

Available operations

4

Press E.

The camera returns to standby mode.

t Memo

• You can set the bracketing order in [8 Bracketing Order] 

of the E2 menu.

• The bracket value can be set in increments of 1/3 EV steps 

or 1/2 EV steps according to the [1 EV Steps] setting made in 

the E1 menu.

• Set [9 One-Push Bracketing] to [On] in the E2 menu to shoot 

the specified number of images with one press of 0.

Remote Control

Remote Control

Remote Control

Cancel

Cancel

OK

OK

Exposure Bracketing

V

Changes the bracket value (up to 

±3 EV)

J→V

Adjusts the exposure 

compensation value.

M

Resets the adjustment value to the 

default setting.

Exposure Bracketing

Exposure Bracketing

Cancel

Cancel

OK

OK

e_kb558_om.book  Page 55  Tuesday, September 16, 2014  11:59 AM