Sony DSC-WX30 Manuel D’Utilisation

GB

9

• When the Power/Charge lamp on the camera does not lit even if the AC Adaptor is 

connected to the camera and the wall outlet (wall socket), it indicates that the 
charging stops temporarily on standby. Charging stops and enters into standby 
mode automatically when the temperature is outside of the recommended 
operating temperature. When the temperature gets back within the appropriate 
range, the charging resumes. We recommend charging the battery pack in an 
ambient temperature of between 10°C to 30°C (50ºF to 86ºF).

• Connect the AC Adaptor (supplied) to the nearest wall outlet (wall socket). If 

malfunctions occur while using the AC Adaptor, disconnect the plug from the wall 
outlet (wall socket) immediately to disconnect from the power source.

• When charging is finished, disconnect the AC Adaptor from the wall outlet (wall 

socket).

• Be sure to use only genuine Sony brand battery packs, multi-use terminal USB 

cable (supplied) and AC Adaptor (supplied).

x

The charging time is approximately 210 min. using the AC Adaptor 
(supplied).

• The above charging time applies when charging a fully depleted battery pack at a 

temperature of 25°C (77°F). Charging may take longer depending on conditions of 
use and circumstances.

1

Connect the camera to the AC Adaptor (supplied), 
using the multi-use terminal USB cable (supplied).

2

Connect the AC Adaptor to the wall outlet (wall socket).

The Power/Charge lamp lights orange, and charging starts.
• Turn off the camera while charging the battery.
• You can charge the battery pack even when it is partially charged.
• When the Power/Charge lamp flashes and charging is not finished, 

remove and re-insert the battery pack.