Sony DSCTX5 Manuel D’Utilisation
GB
9
GB
• Do not open/close the battery/memory card cover or multi-connector cover
with wet or sandy hands or near water. There is a risk this will lead to sand or
water getting inside. Before opening the cover, perform the procedure
described in “Cleaning after using the camera under/near water”.
water getting inside. Before opening the cover, perform the procedure
described in “Cleaning after using the camera under/near water”.
• Open the cover with the camera completely dry.
• Always confirm that the battery/memory card cover and multi-connector
• Always confirm that the battery/memory card cover and multi-connector
cover have been securely locked.
Notes on using the camera under/near water
• Do not subject the camera to shock such as from jumping into water.
• Do not open and close the battery/memory card cover or multi-connector
• Do not subject the camera to shock such as from jumping into water.
• Do not open and close the battery/memory card cover or multi-connector
cover while under/near water.
• Use a separately available housing (Marine Pack) if going more than
3 meters under water.
• This camera sinks in water. Place your hand through the wrist strap to
prevent the camera from sinking.
• Faint, white, circular spots may appear in under-water flash photos due to
reflections off of floating objects. This is not a malfunction.
• Select
(Underwater) in Scene Selection to shoot underwater with less
distortion.
• If water drops or other foreign matter is present on the lens, you will be
unable to record clear images.
Cleaning after using the camera under/near
water
• Always clean the camera with water after use
water
• Always clean the camera with water after use
within 60 minutes, and do not open the battery/
memory card cover before cleaning is finished.
Sand or water may get inside places where it
cannot be seen. If not rinsed, water-proof
performance will be degraded.
memory card cover before cleaning is finished.
Sand or water may get inside places where it
cannot be seen. If not rinsed, water-proof
performance will be degraded.
• Allow the camera to sit in pure water poured into a cleaning bowl for more
than 5 minutes. Then, gently shake the camera, press each button, slide the
zoom (W/T) lever or the lens cover inside the water, to clean away any salt,
sand or other matter lodged around the buttons or the lens cover.
zoom (W/T) lever or the lens cover inside the water, to clean away any salt,
sand or other matter lodged around the buttons or the lens cover.
• After rinsing, wipe away water drops with a soft cloth. Allow the camera to
dry completely in a shady location with good ventilation. Do not blow dry
with a hair dryer as there is a risk of deformation and/or degraded water-
proof performance.
with a hair dryer as there is a risk of deformation and/or degraded water-
proof performance.
• This camera is constructed to drain water. Water will drain from openings
around the ON/OFF (Power) button, zoom (W/T) lever, and other controls.
After removing from water, place the camera on a dry cloth for a while to
allow water to drain.
After removing from water, place the camera on a dry cloth for a while to
allow water to drain.
• Bubbles may appear when the camera is placed under water. This is not a
malfunction.