Sigma LBA-400 Manuel D’Utilisation
#
=
ASCII pound character (0x23)
n
=
ASCII decimal digit ranging from 1 to 9. This value specifies the
number of digit elements, d..d, that follow.
d..d
=
ASCII decimal integer that specifies the number of data words that
follow.
(DAW) =
Data Word. Two 8-bit data bytes, low byte followed by high byte.
The data is transmitted in a row and column sequence beginning at the display’s upper left-hand
corner, proceeding row by row and ending at the lower right-hand corner.
The following example describes how the host controller requests the current frame and receives
The following example describes how the host controller requests the current frame and receives
the data. The received data frame has the dimensions of 64 X 60. Therefore, the LBA-PC
transmits 3840 data words (pixels), or 7680 bytes to the host controller.
Host sends
:RDD?(^END)
:RDD?(^END)
LBA-PC sends
RDD
FrameNumber=9;
Width=64;
Height=60;
#43840(DAW)…(DAW)(^END)
RDD
FrameNumber=9;
Width=64;
Height=60;
#43840(DAW)…(DAW)(^END)
The following example describes how the host controller requests and receives data in frame
number 17. The LBA-PC sends the 32 X 30 frame as 960 data words or 1920 bytes.
Host sends
:RDD?
FrameNumber=17(^END)
:RDD?
FrameNumber=17(^END)
LBA-PC sends
RDD
FrameNumber=17;
Width=32;
Height=30;
#3960(DAW)…(DAW)(^END)
RDD
FrameNumber=17;
Width=32;
Height=30;
#3960(DAW)…(DAW)(^END)
10.6.2 Transferring Data Files
Operator’s Manual
LBA-PC
190
Four commands allow you to download, upload, read or write data files. These commands are: