Veo 802.11b Manuel D’Utilisation

Page de 69
Page 6 of 69 
1.2  Requirements 
 
To connect the camera  to your LAN: 
 
Wireless Observer 
(Infrastructure Mode) 
Wireless  Observer 
(Ad-Hoc Mode) 
Observer 
802.11b (WiFi) Access point 
802.11b (WiFi) network 
interface card for PC 
Open RJ-45 port on your 
router/gateway 
 
To view the camera web page 
 
Web Browser – Internet Explorer for Windows 5.0 or higher 
 
PC with Windows 98, Me, 2000, or XP connected to LAN 
 
To run the included software applications 
 
PC – Intel Pentium II or equivalent, 300MHz or above, 64MB RAM, 150 MB Hard Disk Space, 800x600 
resolution with 16-bit color 
 
Windows 98, Me, 2000, or XP  
 
To access cameras from the Internet 
 
Broadband Internet Connection (DSL, Cable Modem) with min. 128k upload speed 
 
 
 
Note:
 A fixed IP address is not required to access cameras from the Internet. However, if the IP 
address provided by your Internet Service Provider is dynamic (changing) then signing up for a 
dynamic DNS service will make accessing from the Internet much more convenient. Signing up for a 
DDNS is free and easy. Please refer to  Section 7.6: Dynamic Domain Name Service (DDNS) for 
more information.