Veo Observer Manuel D’Utilisation

Page 10 of 65 

The Observer can sit on a flat surface, such a shelf or bookcase, be mounted to a wall using the included 
bracket, or mounted atop a tripod stand using the standard tripod mount located on the underside of the base.  
When using the camera free standing, be sure to secure the cables. Failing to secure the cables could cause 
the camera to be pulled off the mounting surface resulting in damage to the camera. 

The mounting bracket included with your camera provides convenient mounting to vertical surfaces, such as 
walls. The camera support platform can be tilted up or down to help point the camera toward your area of 
interest. You can also rotate the camera in any direction on the platform. 

 

Step 6. Place the camera on the 
mounting bracket platform and rotate 
the camera to be facing in the desired 
direction. 
 
Step 7. Secure the camera to the 
mounting bracket using the 
thumbscrew located on the bottom of 
the platform. 
 

 

        

 
 

 
 
 
 
 
 

 
CAUTION: The camera should be mounted indoors only.  Outdoor exposure may result 
in damage and will void your warranty 
 

 

Step 1. Find a suitable location to mount the camera. 

Step 2. Using the mounting bracket as a guide, mark the location of the two 
mounting holes. 

Step 3. Drill a ¼” hole for each screw. 

Step 4. Use a hammer to tap the two plastic anchors into the holes. 

Step 5. Use the two screws to fasten the bracket to the wall. 

 

Step 8. Loosen the tilt adjust thumbscrew 
and tilt the camera toward the area to be 
observed.