Panasonic DMC-L10K Mode D'Emploi
Others
130
VQT1G28
∫ Setting the travel destination area
(Perform steps
(Perform steps
1
,
2
.)
1 Press
3 to select [DESTINATION] and
then press [MENU/SET] to set.
A Depending on the setting, the time at
the travel destination area or the home
area is displayed.
area is displayed.
• If you are setting the travel destination
area for the first time, the date and time
are displayed as shown in the screen.
are displayed as shown in the screen.
2 Press
2/1 to select the area the travel
destination is in and then press
[MENU/SET] to set.
[MENU/SET] to set.
• The current time at the selected travel
destination area is displayed on the top
right of the screen and the time
difference from the home area is
displayed at the bottom left of the
screen.
right of the screen and the time
difference from the home area is
displayed at the bottom left of the
screen.
• If daylight saving time [
] is used at
the travel destination, press
3. (The
time advances by one hour.) Press
3
again to return to the original time.
• The names of major cities in the
selected area are displayed. Also, the
time difference between the selected
area and the home area is displayed on
the bottom left of the screen.
time difference between the selected
area and the home area is displayed on
the bottom left of the screen.
3 Press [MENU/SET] to close the menu.
• The icon changes from [
] to [
]
after setting the travel destination.
• Return the setting to [HOME] when the
vacation is finished by performing
steps
steps
1
,
2
and then steps
1 and 2 of
“Setting the home area [HOME]”.
• If you cannot find the travel destination in
the areas displayed on the screen, set by
the time difference from the home area.
the time difference from the home area.
MENU
/SET
A
MENU
/SET
MENU
/SET
VQT1G28ENG_L10KP.book 130 ページ ２００７年９月６日 木曜日 午前９時２９分