Panasonic DMC-TZ10 Manuel D’Utilisation

108   

VQT2R48

VQT2R48

   109

For [MOTION PICTURE] menu setting procedures (→20)

■

Settings:
[AVCHD Lite(GPS REC)] in [REC MODE]

Bit rate∗

[GSH]

1280 x 720

17 Mbps

16:9

[GH]

1280 x 720

13 Mbps

[GL]

1280 x 720

9 Mbps

[AVCHD Lite] in [REC MODE]

Bit rate∗

[SH]

1280 x 720

17 Mbps

16:9

[H]

1280 x 720

13 Mbps

[L]

1280 x 720

9 Mbps

[MOTION JPEG] in [REC MODE]

Frame rate∗

[HD]

1280 x 720

30 fps

16:9

[WVGA]

848 x 480

30 fps

[VGA]

640 x 480

30 fps

4:3

[QVGA]

320 x 240

30 fps

∗

  The bit rate is the amount of data per unit time. A higher value translates into a higher image 

quality. This camera uses the VBR (Variable Bit Rate) recording system and the available 

recording time is shorter when recording a subject with rapid movements.

∗

 The frame rate is the number of frames per second.

 

●

[WVGA] cannot be set in [INTELLIGENT AUTO] Mode.

 

●

[QVGA] only can be recorded to the built-in memory.

Either allow the focus to be constantly adjusted during motion picture recording, or fix the 
focus position at the start of recording.

■

■

Settings: [ON]  :  Adjust focus according to movement of subject during motion picture 

recording. (

 appears on the screen.)

[OFF] :  Fix focus position at the start of motion picture recording.
           Use this setting to keep the same focus position for subjects with 

little forward/backward movement.

 

●

The setting is fixed to [OFF] in [STARRY SKY] and [FIREWORKS] Scene Modes.

Reduces recording of wind sounds (wind noise) when recording in a strong wind

■

■

 

●

When [WIND CUT] is set to [ON], lower sounds will be eliminated and the sound quality 
will differ from that of normal recordings.

●

 

●

‘Quick menu’ (→112) is useful to easily call up frequently-used menus.

Sets the data format of the motion picture that is recorded.

■

■

Recording format

Effect

  [AVCHD Lite(GPS 

REC)]∗

These are AVCHD Lite motion pictures to which location name 

information from the start of recording has been added.

 [AVCHD Lite]∗

This is a data format suitable for playback on high-definition TVs.

 [MOTION JPEG]

This is a data format suitable for playback on computers that allows 

even small picture sizes to be recorded. Location name information 

from the start of recording can also be recorded.

∗  When the term “AVCHD Lite motion picture” is used in this manual, it means a motion picture 

recorded in [AVCHD Lite(GPS REC)] or [AVCHD Lite].

 

●

The [REC QUALITY] options vary based on the setting.

 

●

If a card is not loaded in the camera, the motion picture is automatically recorded in [MOTION 

JPEG] ([REC QUALITY]: [QVGA]).

 

●

Even when devices are compatible with motion pictures recorded with this camera, the playback 

may have poor picture or sound quality, or playback may not be possible. Also, the recording 

information may not be displayed properly. In this case, use this unit.

For details on AVCHD compatible devices, refer to the support sites below.

http://panasonic.jp/support/global/cs/dsc/

(This Site is English only.)

 

●

AVCHD Lite motion pictures cannot be played back on devices not compatible with AVCHD (such as 

conventional DVD recorders). Also, motion pictures recorded in [AVCHD Lite(GPS REC)] cannot be 

played back with Panasonic digital cameras (LUMIX) compatible with AVCHD (Lite) recording that 

were sold in or before 2009.

 

●

If positioning fails and location name information is not saved, the location name information is not 

recorded.

 

●

Because AVCHD Lite motion pictures do not conform to DCF and Exif, some information (such as 

picture number, White Balance, etc.) is not displayed during playback.

 

●

Using a card of SD speed ‘Class 4’∗ or above is recommended for recording motion pictures in 

[AVCHD Lite(GPS REC)]/[AVCHD Lite].

Using a card of SD speed ‘Class 6’∗ or above is recommended for recording motion pictures in 

‘MOTION JPEG’.

∗ The SD speed class is a speed rating for continuous writing.

 

●

To play back AVCHD Lite motion pictures using a computer, please use the ‘PHOTOfunSTUDIO’ 

software on the CD-ROM supplied.

Sets the picture quality of the motion picture that is recorded.

■