Panasonic DMC-LS1GN Manuel D’Utilisation

Recording pictures (basic)

VQT0Q78

∫ Shutter speed for each flash setting

¢The shutter speed changes depending on the slow shutter setting. (P66)

• Do not stare at the photo flash from

close proximity.

• If you bring the flash too close to the

subjects, they may be distorted or
discoloured by its heat and lighting.

• Do not cover the photo flash with your

fingers or any other items.

• While the flash is charged, the LCD

monitor turns off and you cannot take
pictures. The status indicator lights.
[Except when the AC adaptor
(DMW-AC2; optional) is used.]
If the remaining battery power is low,
the LCD monitor may be turned off for
longer time.

• When you take a picture beyond the flash

control range, the exposure may not be
adjusted properly and the picture may
become bright or dark.

• When you repeat taking a picture,

recording may be disabled even if the
flash is activated. Take a picture after the
access indication disappears.

• When the jitter alert appears, we

recommend using the flash.

• When you set to burst mode or auto

bracket, only 1 picture is recorded for
every flash activated.

• The flash icon turns red when activating

the flash and pressing the shutter button
halfway.

• When taking a picture with the flash, the

white balance will be automatically
adjusted [except for [

] (Daylight)], but

the white balance may not be properly
adjusted if the flash level is insufficient.

• When the shutter speed is fast, the flash

effect may not be sufficient.

Flash setting

Shutter speed (Sec.)

: AUTO

1/60 – 1/2000

: AUTO/Red-eye reduction

1/60 – 1/2000

: Forced ON
: Forced ON/Red-eye reduction

1/60 – 1/2000

: Slow sync./Red-eye reduction

1/8

– 1/2000

: Forced OFF

1/8

– 1/2000

8 – 1/2000
(In [NIGHT SCENERY] in
scene mode)

VQT0Q78ENG.book 41 ページ２００５年２月１４日　月曜日　午後１時１５分