Nikon D5000 Manuel D’Utilisation

203

n

The following SD memory cards have been tested and approved for use in the D5000. 
All cards of the designated make and capacity can be used, regardless of speed.

Other cards have not been tested. For more details on the above cards, please 
contact the manufacturer.

 (

0 67): Use as a remote shutter release for self-portraits 

or to prevent blur caused by camera shake. The ML-L3 uses a 3 V CR2025 battery.

Pressing the battery-chamber latch to the right (q), insert a fingernail into the gap 
and open the battery chamber (w). Ensure that the battery is inserted in the 
correct orientation (r). 

The D5000 is equipped with an accessory terminal for 
MC-DC2 remote cords (

0 86) and GP-1 GPS units 

(

0 114),  which connect with the 4 mark on the 

connector aligned with the 

2 mark next to the 

accessory terminal as shown at right (to access the 
accessory terminal, open the connector cover; close the 
cover when the terminal is not in use).

512 MB, 1 GB, 2 GB

*

, 4 GB

†

, 8 GB

†

, 16 GB

†

512 MB, 1 GB, 2 GB

*

, 4 GB

†

, 8 GB

†

, 16 GB

†

, 32 GB

†

512 MB, 1 GB, 2 GB

*

, 4 GB

†

, 6 GB

†

, 8 GB

†

, 12 GB

†

, 16 GB

†

, 32 GB

†

512 MB, 1 GB, 2 GB

*

, 4 GB

†

, 8 GB

†

: 512 MB, 1 GB, 2 GB

*

, 4 GB

†

  8 GB

†

:  1 GB,  2 GB

*

, 4 GB

†

  8 GB

†

* If card will be used with card reader or other device, check that the device supports 2GB cards.
† SDHC  compliant. If card will be used with card reader or other device, check that the device 

supports SDHC.