Nikon S800c Guide D’Exploitation

E

Re
fe

The following table lists the error messages and other warnings displayed in the 
monitor, as well as the solutions for dealing with them.

Display

Cause/Solution

A

O (flashes)

Clock not set.
Set date and time.

Battery exhausted.

Battery exhausted.
Charge or replace battery.

12, 14

Battery 
temperature high.

Battery temperature is high.
Turn off camera, and allow battery to cool down before 
resuming use. When this message is displayed, the 
power-on lamp starts flashing quickly and the monitor 
turns off after 5 seconds.

The camera will 
turn off to prevent 
overheating.

Inside of the camera or the memory card has become hot.
Turn off camera, and allow battery to cool down before 
resuming use.

Camera 
temperature high.
Wi-Fi disabled.

Inside of the camera has become hot, and the Wi-Fi 
(wireless LAN) function has stopped.
Press OK and allow inside of camera to cool down before 
resuming use.

–

Camera 
temperature high.
Wireless disabled.

Inside of the camera has become hot, and the connection 
between camera and smart device has been terminated.
Press OK and allow inside of camera to cool down before 
resuming use.

–

Q (

● flashes red)

Camera cannot focus.

• Refocus.

• Focus on another subject positioned at the same 

distance from the camera as the intended subject.

24, 25
60

Please wait for the 
camera to finish 
recording.

Camera cannot perform other operations until recording 
is complete.
Wait until message clears from display automatically 
when recording is complete. Do not open the battery-
chamber/memory card slot cover during recording.

–