Nikon D50 Manuel D’Utilisation

When the camera will not be used for an extended period, remove the 
battery, and store the battery in a cool, dry area with the terminal cover in 
place.  To pre vent mold or mil dew, store the cam era in a dry, well-ven ti lat ed 
area.  Do not store your cam era with naph tha or cam phor moth balls or in 
lo ca tions that:
•  are poorly ventilated or subject to humidities of over 60%
•  are next to equipment that produces strong elec tro mag net ic fi elds, such 

as televisions or radios

• are exposed to temperatures above 50 °C/122 °F (for example, near a 

space heater or in a closed ve hi cle on a hot day) or below –10 °C (14 °F)

Use a blower to remove dust and lint, then wipe gently with a soft, 
dry cloth.  After using the camera at the beach or seaside, wipe off 
sand or salt with a cloth lightly dampened in distilled water and dry 
thor ough ly.

IMPORTANT: Dust or other foreign matter inside the camera may 
cause damage not covered under warranty.

These elements are made of glass and are easily dam aged.  Remove 
dust and lint with a blower.  If using an aerosol blower, keep the can 
vertical to prevent the discharge of liquid.  To remove fi ngerprints and 
other stains, apply a small amount of lens cleaner to a soft cloth and 
clean with care.

Remove dust and lint with a blower.  When removing fi ngerprints 
and other stains, wipe the surface lightly with a soft cloth or cham-
ois leath er.  Do not apply pressure, as this could result in damage or 
malfunction. 

Should the monitor break, care should be taken to avoid injury caused by broken 
glass and to prevent liquid crystal from entering your eyes and mouth.

Rarely, static electricity may cause the control panel to brighten or darken.  This does 
not indicate a malfunction; the display will shortly return to normal.