Nikon 25468 Manuel D’Utilisation

162

t

The GP-1 GPS unit (available separately) can be connected to the camera’s accessory 
terminal (

0 281) using the cable supplied with the GP-1, allowing information on the 

camera’s current position to be recorded when photographs are taken. Turn the 
camera off before connecting the GP-1; for more information, see the GP-1 manual.

❚❚Setup Menu Options

The GPS item in the setup menu contains the options listed below.
• Auto meter-off: Choose whether the exposure meters turn off automatically when 

the GP-1 is attached. 

• Position: This item is only available if the GP-1 is connected, 

when it displays the current latitude, longitude, altitude, and 
Coordinated Universal Time (UTC) as reported by the GP-1.

• Use GPS to set camera clock: Select Yes to synchronize the camera clock with the time 

reported by the GPS device.

Exposure meters turn off automatically if no operations are performed for the 
time selected for Custom Setting c2 (Auto meter-off delay, 

0 214; to allow the 

camera time to acquire GPS data, the delay is extended by up to one minute after 
the exposure meters are activated or the camera is turned on). This reduces the 
drain on the battery.

Disable Exposure meters do not turn off while the GP-1 is connected.

A

UTC data is provided by the GPS device and is independent of the camera clock.

A

! Icon

Connection status is shown by the 

! icon:

! (static): Camera has established communication with GP-1. 
Photo information for pictures taken while this icon is displayed 
include an additional page of GPS data (

0 169).

! (flashing): The GP-1 is searching for a signal. Pictures taken while 
the icon is flashing do not include GPS data.

• No icon: No new GPS data have been received from the GP-1 for at least two seconds. 

Pictures taken when the 

! icon is not displayed do not include GPS data.