Nikon L820 Black Mode D'Emploi

E

Re

fere

nce
 S

ecti

on

Set the TV’s input to external video input.

• See your TV’s documentation for details.

Hold down the c button to turn on the 
camera.

• The camera enters playback mode and images are 

displayed on the TV.

• While connected to the TV, the camera monitor remains 

off.

B

An HDMI cable is not included. Use a commercially available HDMI cable to connect the camera to a 
TV. The output terminal on this camera is an HDMI micro connector (Type D). When purchasing an 
HDMI cable, be sure that one end of the cable is an HDMI micro connector.

B

• When connecting the cable, be sure that the camera connector is properly oriented, do not insert 

the cable at an angle, and do not use excessive force. When disconnecting the cable, do not pull 
the connector at an angle.

• Do not connect cables to the HDMI micro connector and to the USB/audio/video output 

connector simultaneously.

B

Be sure that the camera’s TV settings (

E74) in the setup menu matches the standard used by 

your TV.

C

The remote control of an HDMI-CEC-compatible TV can be used to control playback.
It can be used instead of the camera’s multi selector and zoom control to select images, start and 
pause movie playback, switch between full-screen playback mode and 4-image thumbnail playback 
mode, etc.
• Set the HDMI device control setting (E74) in TV settings to On (default setting) and then 

connect the camera and TV using an HDMI cable.

• Aim the remote control at the TV when operating it.
• Refer to the TV’s operating instructions for information about the TV’s HDMI-CEC compatibility.