Nikon 25492b Mode D'Emploi

Page de 228
12
X
First Steps
Charge the Battery
The camera is powered by an EN-EL14 rechargeable Li-ion battery (supplied). To 
maximize shooting time, charge the battery in the supplied MH-24 battery charger 
before use. About 1 hour and 30 minutes are required to fully recharge the battery 
when no charge remains.
1
Remove the terminal cover.
Remove the terminal cover from the battery.
2
Insert the battery.
Insert the battery as shown in the illustration on the 
charger.
3
Plug the charger in.
The CHARGE lamp will flash slowly while the battery charges.
4
Remove the battery when charging is complete.
Charging is complete when the CHARGE lamp stops flashing. Unplug the charger 
and remove the battery.
A
The Plug Adapter
Depending on the country or region of purchase, a plug adapter may 
be supplied with the charger. The shape of the adapter varies with 
the country or region of purchase. If a plug adapter is supplied, raise 
the wall plug and connect the plug adapter as shown at right, making 
sure the plug is fully inserted. Attempting to forcibly remove the 
plug adapter could damage the product.
D
Charging the Battery
Charge the battery indoors at ambient temperatures between 
5–35°C (41–95°F). The battery will not charge if its 
temperature is below 0 °C (32 °F) or above 60 °C (140 °F).
D
During Charging
Do not move the charger or touch the battery during charging. 
Failure to observe this precaution could in very rare instances 
result in the charger showing that charging is complete when 
the battery is only partially charged. Remove and reinsert the 
battery to begin charging again.
Battery
charging
Charging 
complete