Konica Minolta A200 Manuel D’Utilisation
127
Changing the battery
The remote control uses a 3V CR2025 lithium battery.
Slide and hold the release in the direction
shown (1) and slide the chamber (2) out of
the remote control unit. Take care not to
drop the battery.
shown (1) and slide the chamber (2) out of
the remote control unit. Take care not to
drop the battery.
Slide the battery chamber back into the remote control until it clicks into place.
2
1
The remote control battery should be replaced if the self-timer lamp does not blink to
indicate the camera has received a signal from the remote control unit.
indicate the camera has received a signal from the remote control unit.
Replace the battery as shown with the positive pole down.