Konica Minolta A200 Manuel D’Utilisation
With the camera on a tripod, position the subject
within the focus frame.
within the focus frame.
Point the remote control’s emitter window toward the
camera’s self-timer lamp/remote-control receiver.
camera’s self-timer lamp/remote-control receiver.
Pressing the information display button changes the
display format, see page 43.
display format, see page 43.
Digital zoom (p. 102) is activated by the digital-zoom
buttons.
buttons.
79
Emitter window
Release button
Digital-zoom
buttons
Controller
Information
display button
Battery chamber
Using the remote control
Press the release button or the center (2s) button of the controller to take the picture. The
central button delays the release of the shutter for approximately two seconds; the self-
timer lamp and the audio signal indicates the countdown. The self-timer lamp glows
steadily just before the shutter releases. The release button fires the shutter without a
delay. If the flash is used, the shutter is released after the flash has charged.
central button delays the release of the shutter for approximately two seconds; the self-
timer lamp and the audio signal indicates the countdown. The self-timer lamp glows
steadily just before the shutter releases. The release button fires the shutter without a
delay. If the flash is used, the shutter is released after the flash has charged.
The focus and exposure are set when the release button or the central button of the
controller is pressed.
controller is pressed.
When recording movies or bulb exposures, pressing the release button or the central
button of the controller once starts the exposure; pressing the button a second time ends
it.
button of the controller once starts the exposure; pressing the button a second time ends
it.