Konica Minolta DiMAGE_A2 Manuel D’Utilisation
Installing and Changing the Battery
Open the battery-chamber door by sliding the battery-chamber
lock to the open position.
lock to the open position.
Insert the battery with the battery contacts first. Insert the bat-
tery so that it slides past the battery latch in the chamber. Push
the battery into the chamber until the latch clicks into place.
tery so that it slides past the battery latch in the chamber. Push
the battery into the chamber until the latch clicks into place.
This digital camera uses one NP-400 lithium-ion battery. Before using the battery, read the safety
warnings on pages 4 of this manual. When replacing batteries, the camera should be off.
warnings on pages 4 of this manual. When replacing batteries, the camera should be off.
To remove a battery, slide the battery latch to the side of the
battery chamber; the battery will spring out.
battery chamber; the battery will spring out.
Close the battery-chamber door and slide the battery-chamber
lock to the closed position.
lock to the closed position.
23