Canon 4460B003 Manuel D’Utilisation
119
You can select one of four methods to measure the subject brightness.
In Basic Zone modes, evaluative metering is set automatically.
In Basic Zone modes, evaluative metering is set automatically.
1
Press the <n> button.
(9)
2
Select the metering mode.
While looking at the LCD panel, turn
the <6> dial.
the <6> dial.
q
Evaluative metering
This is a general-purpose metering mode suited for
portraits and even backlit subjects. The camera
sets the exposure automatically to suit the scene.
portraits and even backlit subjects. The camera
sets the exposure automatically to suit the scene.
w
Partial metering
Effective when the background is much brighter than
the subject due to backlighting, etc. Partial metering
covers approx. 6.5% of the viewfinder area at the
center.
the subject due to backlighting, etc. Partial metering
covers approx. 6.5% of the viewfinder area at the
center.
r
Spot metering
This is for metering a specific spot of the subject or
scene. The metering is weighted at the center
covering approx. 2.8% of the viewfinder area.
scene. The metering is weighted at the center
covering approx. 2.8% of the viewfinder area.
e
Center-weighted average metering
The metering is weighted at the center and then
averaged for the entire scene.
averaged for the entire scene.
q
Selecting the Metering ModeN
COP
Y