Canon 4460B003 Manuel D’Utilisation

154

A Shooting with the LCD Monitor

 

Each time you press the <B> button, the information display will 
change.

Magnifying frame

ISO speed

Possible shots

Exposure level indicator/AEB range

Aperture

Shutter speed

Picture Style

Battery check

Exposure 
simulation

Drive mode

White balance

Flash exposure

compensation

AF mode
• d : Live mode
• c : Face detection Live mode
• f: Quick  mode

AF point (Quick mode)

FEB

AEB

Highlight tone 
priority

Histogram

Image-recording quality

AE lock

Flash-ready

Auto Lighting

Optimizer

Eye-Fi card 
transmission 
status

 

The histogram can be displayed when [Expo. simulation: Enable] has 
been set (p.158).

 

You can display the electronic level by pressing the <B> button (p.266). 
Note that if the AF mode is set to [u Live mode] or the camera is connected 
to a TV set with an HDMI cable, the electronic level cannot be displayed.

 

When <g> is displayed in white, it indicates that the Live View image 
brightness is close to what the captured image will look like.

 

If <g> is blinking, it indicates that the Live View image is not being 
displayed at the suitable brightness due to low or bright light conditions. 
However, the actual image recorded will reflect the exposure setting.

 

If flash is used or bulb is set, the <g> icon and histogram will be 
grayed out (for your reference). The histogram might not be properly 
displayed in low- or bright-light conditions.

COP

Y