Canon 4460B003 Manuel D’Utilisation

28

If you turn on the power switch and the date/time setting screen 
appears, see page 30 to set the date/time.

<1>

: The camera turns on.

<2> : The camera is turned off and 

does not operate. Set to this 
position when not using the 
camera.

 

Whenever you set the power switch 
to <1> or <2>, the sensor 
cleaning will be executed 
automatically (A small sound may be 
heard). During the sensor cleaning, 
the LCD monitor will display <f>.

 

Even during the sensor cleaning, you can still shoot by pressing the 
shutter button halfway (p.40) to stop the sensor cleaning and take a 
picture.

 

If you repeatedly turn the power switch <1>/<2> at a short 
interval, the <f> icon might not be displayed. This is normal and 
not a problem.

 

To save battery power, the camera turns off automatically after 
approx. 1 minute of non-operation. To turn on the camera again, just 
press the shutter button halfway (p.40).

 

You can change the auto power-off time with the menu’s [5 Auto 
power off] setting (p.50).

If you set the power switch to <2> while an image is being recorded to 
the card, [Recording ...] will be displayed and the power will turn off after 
the card finishes recording the image.

COP

Y