Canon 8230B001 Manuel D’Utilisation

96

If you chose [PIN Method] in step 5, a PIN code will be displayed on the 

screen. Be sure to set this code in the access point. Choose a device in the 

[Select a Device] screen. For further details, refer to the user guide included 

with your access point.

To add multiple computers, repeat the above procedures starting from step 1.

When finished adding computers, touch [

^] in the upper right of the image 

transfer screen displayed after you connect to a computer in step 7. Touch 

[OK] after the confirmation message.

To disconnect from the camera, turn off the camera.

When a connection destination is set using the Touch Actions setting 

(

connected destination from the next time by just dragging on the screen 

without needing to perform the connection operation.

z

z

View the listed access points as 

described in steps 1 – 3 of “Adding a 

z

z

Touch the network (access point) that you 

want to connect to.

z

z

Touch inside the frame shown at left to 

access the keyboard, and then enter the 

z

z

Touch [Next].

z

z

Touch [Auto].

X

X

A list of other devices connected to the 

access point will appear in the [Select a 

Device] screen.

z

z

Choose the computer to connect to, 

following steps 7 – 8 in “Adding a 

  95). The computer is 

now added to the list.

For information on the access point’s encryption key, refer to the body of the 

access point or its user manual.

Up to 16 access points will be displayed. If no access points are detected, 

choose [Manual Settings] in step 2 to manually set an access point. Follow 

on-screen instructions and enter an SSID, security settings, and an encryption 

key.

When you use an access point that you have already connected to for 

connecting to another device, [*] is displayed for the encryption key in step 3. 

To use the same encryption key, touch [Next].

To add multiple computers, repeat the above procedures starting from step 1.

COP

Y