Casio EX-Z800 Manuel D’Utilisation

105

Dynamic Photo

Use the following procedure to insert a subject image into a snapshot or movie.

Use [8] and [2] to select the second PLAY Panel item from the bottom 
(Dynamic Photo) and then press [SET] (page 90).

Use [4] and [6] to select the background image you want and then 
press [SET].

• Only an image that satisfies the following conditions can be used as a 

background image.
– A snapshot or movie recorded with this camera or a snapshot transferred to 

this camera’s memory using Photo Transport (page 122)

– A snapshot with an aspect ratio of 4:3

Use [4] and [6] to select the subject image you want to insert and then 
press [SET].

If you are inserting a subject into a movie an 
image will appear on the monitor screen 
showing the approximate location of the 
subject in the movie. Use [4] and [6] to shift 
the location to the position you want. After you 
are finished, press [SET].

• If you insert a subject into a movie, the resulting movie will be a maximum of 20 

seconds long. Everything before and after the insertion is cut off. If the movie 
you are inserting into (original movie) is shorter than 20 seconds, the resulting 
movie will be the same length as the original movie.

• If you are inserting a subject into a snapshot, skip directly to step 6.

Use the zoom controller to adjust the size of the subject and use [8], 
[2], [4], and [6] to adjust its position.

This inserts the subject into another image and creates a Dynamic Photo.

• Inserting an animated subject into a snapshot will save a Dynamic Photo that 

consists of 20 still images of 2M size or smaller.

• Inserting a stationary subject into a snapshot will save a single still image of 6M 

size or smaller.

• Inserting a subject into a movie will save the Dynamic Photo as a movie file.

Insert location