Casio EX-TR100 Manuel D’Utilisation

34

Quick Start Basics

• If unwanted light is shining directly onto the lens, shade the lens with your hand.

• Subject brightness conditions can cause monitor screen response to slow and can 

cause digital noise in the monitor screen image.

• The image that appears on the monitor screen is for image composition. The actual 

image will be recorded in accordance with the currently selected recording mode 
(page 36).

• Minute flickering of fluorescent lighting can affect the brightness or color of an 

image.

• The slower the shutter speed, the greater the possibility that noticeable noise will 

be generated in an image. Because of this, the camera automatically performs a 
noise reduction at slow shutter speeds. The noise reduction process causes it to 
take longer to record images at lower shutter speeds. The shutter speeds for which 
noise reduction is performed depend on the camera setup and shooting conditions.

• A noise reduction process is performed when ISO sensitivity is set to a high value. 

This can cause the camera to take relatively longer to be ready to shoot again after 
you press the shutter button. Do not perform any operation while the image 
recording operation is in progress.

• Due to the characteristics of the imaging element used by the camera, very fast 

moving objects in an image may appear distorted.

• Any of the following can make proper focus impossible.

– Solid color wall or other very low contrast subject
– Strongly back lit subject
– Very shiny subject
– Blinds or other subject with a repeating horizontal pattern
– Multiple subjects at varying distances from the camera
– Subject in a dark location
– Camera movement while shooting
– Fast-moving subject
– Subjects outside the focus range of the camera

• If you cannot focus properly, try using focus lock (page 62).