Casio EX-FC100 Manuel D’Utilisation

62

Recording Movies

• The higher the frame rate (speed), the more lighting is required when shooting. 

When shooting a high speed movie, shoot in a well-lit environment.

• When recording certain types of movies, the image that appears on the monitor 

screen may be smaller than normal. When recording a high speed movie, there are 
black bands along the top, bottom, left, and right of the screen.

• When recording a high speed movie, light source flicker can cause horizontal 

bands to appear in the image. This does not indicate malfunction of the camera.

• During high speed movie recording, Auto Focus and exposure remain fixed at the 

levels they were when you initially started recording. Zoom and monitor screen 
content switching are all disabled.

• To focus the image, half-press the shutter button for Auto Focus or focus manually 

before starting the high speed movie recording operation.

With this feature, the camera pre-records up to five seconds of whatever is happening 
in front of the lens in a buffer that is continually updated. Pressing [0] saves the 
pre-recorded action (buffer contents) followed by real-time recording. Real-time 
recording continues until you stop it. Prerecord Movie can be used when shooting a 
standard (STD) movie, a high-definition (HD) movie, or a high speed (HS) movie.

• When using Prerecord Movie in combination with high speed movie, the buffer will 

store two seconds of pre-recording instead of the usual five.

[0]

Movie

Real-time recording start

5-second prerecorded part (from the buffer)

*

Approximately two seconds for high speed movie

[0]

Real-time recording end