Argus Camera DC1500N Manuel D’Utilisation

Page de 26
or modification of the device may result in interference to radio or television 
reception and could void the user’s authority to operate this device. 
 
 
Precautions 
Thank you for purchasing DC1500 Digital Camera. Please read the following 
precautions carefully before using the product. 
 
This camera is not resistant to water and should not be used outdoors in 
snow or rain. If accidentally dropped in water, please quickly pour out the 
water. Dry it with sunlight or an air-blower. 
 
Protect it from excessive humidity. It will wet the lens and the pictures 
taken will be blurred. 
 
Do not expose the camera to sand 
 
Do not attempt to disassemble the camera yourself. Always take it to an 
authorized service facility for repair. 
 
To store the camera, wrap it in a piece of clean, soft cloth and place it in a 
cool, dry, dust-free place. Do not place the camera directly under the sun 
or in any hot circumstances. 
 
Take care of the lens. Use special cloth to clean it. 
 
Do not scratch hard objects against the Lens, Status LCD Panel, or 
Viewfinder. 
 
If the Status LCD Panel is damaged, do not touch it. 
 
Condensation is a problem when bringing cold equipment into a warm 
room. Try to put the camera in a plastic bag so condensation forms on the 
outside of the bag. 
About batteries 
 
Battery life is shorter for poor quality batteries. 
 
If nothing at all appears on the Status LCD panel, the batteries may be 
inserted in wrong orientation. 
 
The batteries may explode or cause burns if disassembled, recharged, 
shorted, exposed to high temperature, or disposed of in fire. 
 
Alkaline or Ni-MH batteries can be used with this camera. The camera 
may not function properly if you use poor quality batteries. 
 
Make sure all batteries are fresh, unused or fully charged. 
 
Ensure that batteries’ orientation is correct when placing them in the 
camera 
 
Remove the batteries if you do not expect to use the camera for 1 month 
or longer. 
 
Important: Do not connect camera to PC before drivers are 
installed.