Canon CP720 Manuel D’Utilisation
21
This feature prints a select portion of an image.
The trimming feature can only be used in the
(Single) mode.
1
Press the TRIM. button.
The image will display at full size on the LCD monitor.
2
Press the DISP. button.
The display will switch into a mode allowing you to set the print area
size and orientation.
size and orientation.
3
Press the
and
buttons to adjust the size of the print
area.
Press the
and
buttons to rotate the frame 90 degrees.
4
Press the DISP. button.
The display will switch back into the mode for setting the frame
position.
position.
5
Press the
,
,
and
buttons to shift the print area
as desired.
6
When you finish the adjustments, press the TRIM.
button.
button.
This concludes the trimming settings.
• To cancel the trimming setting, press the
button until the print area
frame disappears when you have the display in the mode for setting the
print area size and orientation.
print area size and orientation.
• The trimming setting is reset when the print is completed.
Trimming Settings (CP730 Only)