Panasonic KX-PX20M Manuel D’Utilisation

Others

Follow the procedures described below. If you are not able to solve the problem,
contact your dealer.

Power source

Problem

Cause and Remedy

Page

The power is not on.

• Are the power cord and AC adaptor connected

correctly?
⇒ Connect the power cord and AC adaptor correctly.

The power is not off.

• Press the POWER button for approximately 1 second.

The POWER lamp lights up in red. (Standby mode)

• When the printer is in sleep mode or when the message

is displayed on the LCD monitor, the power is not turned
off, even if the POWER button has been pressed.
⇒ Now that sleep mode is off, press the POWER button

again for approximately 1 second. Once the message
is displayed, press the POWER button once more
for approximately 1 second after dealing with the
message.

LCD monitor

Problem

Cause and Remedy

Page

The LCD monitor is
turned off although
the printer is turned
on.

• When "Sleep" is set to [10min] or [5min], the LCD

monitor is automatically turned off if the printer has not
been used for the time selected.
⇒ Press any button to resume operations.

Some pixels are
inactive or always lit
on the LCD monitor.

• This is not a malfunction. These pixels do not affect

printing.

Noise appears on
the LCD monitor.

• In dark places, noise may appear to maintain the

brightness of the LCD monitor. This does not affect
printing.

—

1 To resume with the POWER button, press the POWER button for approximately 1 second.

Troubleshooting

Continued on next page

KX-PX20M.indb 91

2006/12/22 14:05:05