Ikelite S95 Manuel D’Utilisation
9
10
11
12
Lens Port
Treat the glass in the lens port as a camera lens. After use, rinse
and gently dry the outside lens port to avoid water spotting. To
clean, use a mild soap solution or lens cleaner. Do not rinse the
inside port glass.
and gently dry the outside lens port to avoid water spotting. To
clean, use a mild soap solution or lens cleaner. Do not rinse the
inside port glass.
Do not use alcohol or window cleaner on the
Lens Port.
Lubricants
1. Ikelite provides silicone lubricant with the housing. We recommend
you use only Ikelite lubricant on Ikelite products. Other brands may
cause the o-ring to swell and not seal properly.
cause the o-ring to swell and not seal properly.
2. Use only enough lubricant to lightly cover the main housing
o-ring. Wipe off any excess lubricant with a clean cloth.
Lubricant is not a sealant, it is used to reduce friction. Excessive
lubricant can collect sand and dirt which may interfere with
proper sealing.
Lubricant is not a sealant, it is used to reduce friction. Excessive
lubricant can collect sand and dirt which may interfere with
proper sealing.
CAUTION: Never use spray lubricants as the propellant ingredient
can cause the plastic housing to crack.
can cause the plastic housing to crack.
Optional Accessories
Ikelite Lube #5020 (4 - 1cc tubes)
For light lubrication of the main housing o-ring.
Main Housing O-ring #0132.45
O-rings last for several years if properly maintained (See
maintenance). Always carry a spare in case your housing o-ring
becomes damaged or lost.
maintenance). Always carry a spare in case your housing o-ring
becomes damaged or lost.
Additional Control Ring Gear #0099.23
Backup Control Ring Gear for the camera lens.
UR/Pro Filter (Blue Water) #6441.41 (3” port)
The UR/Pro underwater color correcting filter is designed to
restore some of the warm colors filtered out by the water. For
available light use only; not recommended for use with flash.
restore some of the warm colors filtered out by the water. For
available light use only; not recommended for use with flash.
Green Water Filter #6441.81 (3” port)
Enhances contrast and alters the color of green water to give
your subject a rich, natural tone. For available light use only.
Not recommended for use with flash.
your subject a rich, natural tone. For available light use only.
Not recommended for use with flash.
Ikelite Digital Strobe Packages
For the best photo results in all shooting conditions, Ikelite highly
recommends that you use an
external digital strobe. Ikelite
strobes are much more powerful,
recycle more quickly, and eliminate
backscatter created by the camera's
built-in flash. Strobe packages come
complete with the strobe, arm, and
slave unit (to sense the camera
flash).
recommends that you use an
external digital strobe. Ikelite
strobes are much more powerful,
recycle more quickly, and eliminate
backscatter created by the camera's
built-in flash. Strobe packages come
complete with the strobe, arm, and
slave unit (to sense the camera
flash).
The addition of an external strobe to
your housing will help
eliminate particles in the water that
are “lit-up” by the camera flash,
commonly called backscatter. A
second strobe will eliminate
shadows and add more depth to
your subjects.
your housing will help
eliminate particles in the water that
are “lit-up” by the camera flash,
commonly called backscatter. A
second strobe will eliminate
shadows and add more depth to
your subjects.
The #4035
AF35 AutoFlash Kit strobe package is designed specifi-
cally for the Ikelite Compact and ULTRAcompact Digital housings.
ikelite
35
AF
ikelite
AU
TO
FLA
SH
ike
lite
35
AF
ike
lite
AU
TO
FL
AS
H
Optional Accessories
(cont.)
AF35 AutoFlash Kit includes:
- AF35 strobe
- Flex arm
- AutoFlash sensor
- Handle with rubber grip
- Tray (single or dual)
- Mounting hardware
Diffuser and Deflector Installation
A diffuser and deflector are
included with the housing.
The diffuser is white
transparent plastic. The
deflector is also white but is
not transparent.
included with the housing.
The diffuser is white
transparent plastic. The
deflector is also white but is
not transparent.
To install the diffuser or
deflector, simply push the
Cut-out Section into the port
groove until it stops. The
white plastic should be placed
in front of the camera flash as
shown below.
deflector, simply push the
Cut-out Section into the port
groove until it stops. The
white plastic should be placed
in front of the camera flash as
shown below.
Note the Small Hole. To avoid losing the diffuser/deflector, you
can attach a fishing line or string to this hole.
Diffuser/Deflector Material
Small Hole
Cut-out
Section
Section
Diffuser
The diffuser should be installed when using the camera’s built
in flash. When shooting with the camera’s built-in flash at
approximately 2 feet (0.6 m) or less, the lens port on the
housing will block a portion of the light from the camera’s
built-in flash, creating a shadow in the lower right area of the
photo. Zoom the lens to eliminate the shadow
in flash. When shooting with the camera’s built-in flash at
approximately 2 feet (0.6 m) or less, the lens port on the
housing will block a portion of the light from the camera’s
built-in flash, creating a shadow in the lower right area of the
photo. Zoom the lens to eliminate the shadow
(You can test
this above water).
Deflector
The deflector should be installed when using an external strobe
such as the AF35, DS51, DS160, DS161 or DS200 Substrobe with
an EV Controller. The deflector will redirect the camera’s flash
to the slave unit or EV Controller which controls the external
strobe’s output.
such as the AF35, DS51, DS160, DS161 or DS200 Substrobe with
an EV Controller. The deflector will redirect the camera’s flash
to the slave unit or EV Controller which controls the external
strobe’s output.
Lens Port
Lens Port
Housing shown with
Deflector installed.
Deflector installed.