Epson 850Z Manuel D’Utilisation
1-14 Using Advanced Camera Features
8
Focus the camera on a piece of white paper, or some
other object to set the white balance by, and press the
other object to set the white balance by, and press the
shutter button to save the setting.
9
Press
to select
User
and press the
SEL
button.
10
Press the
ESC
button twice to return to view mode. An
arrow appears next to the WB (white balance) symbol
on the display panel.
on the display panel.
11
Follow the instructions on page 3-9 in Getting Started to
take pictures with the LCD screen as usual.
12
To switch back to auto white balance, follow steps 1
through 6 above, but change from
through 6 above, but change from
User
to
Auto.
Then
press the
ESC
button twice to return to view mode.
NOTE
You can’t set a user-defined white balance if your camera
memory is full.
Adjusting Exposure
Your camera normally adjusts exposure
automatically. If you want to lighten or darken a
automatically. If you want to lighten or darken a
photo before you take it, you can use the manual setting, and
adjust the exposure by hand for any photo you take.
adjust the exposure by hand for any photo you take.
Make sure the camera dial is set to
View
, then follow these
steps to take pictures with manual exposure adjustment:
1
Press the
SEL
button to display the menus.
2
Press
or
to display the Conditions menu.
Lily.book Page 14 Tuesday, March 2, 1999 4:06 PM