HP (Hewlett-Packard) Media Vault Manuel D’Utilisation

 

How to restart and reset the HP Media Vault

1. Double-click the HP Media Vault icon on your desktop.  
2. Click Customize your HP Media Vault’s setting.  
3. If the Welcome Screen appears, click Configure Device. 
4. Click the System Settings tab. 
5. Click Restart Device. Restarting the media vault simply turns it off and on – as if you unplugged and 

plugged it back in. You will not lose any of your current settings. 

Note: You can also Restart the media vault by pressing the power button on the front of the media vault, or 

pressing the restart/reset button on the back of the media vault. If you use the button located on the back of your 

media vault, do not press the button for more than four to five seconds. Pressing this button for longer than five 
seconds will completely Reset your media vault. (See 

1. Double-click the HP Media Vault icon on your desktop.  
2. Click Customize your HP Media Vault’s setting.  
3. If the Welcome Screen appears, click Configure Device. 
4. Click the System Settings tab. 
5. Click Reset Device to Factory Default. Only select this option if you have a media vault that is 

failing to respond to normal commands. Many of the settings you might have changed through the media 

vault’s configuration screens will be reset to their factory default settings. For example usernames and 

passwords established in user-based mode are deleted. However, the reset device button does not alter 

your Shared Folders or any file content. 

Note: You can also Reset the media vault by pressing the restart/reset button on the back of the media vault. 

To achieve a complete reset, you must press and hold in the button for at least 10 seconds. Pressing this button 
for less than 10 seconds will only Restart your media vault. (See 

.)