Siemens 6AU1900-1AB32-0BA0 Manuel D’Utilisation
Functions
4.7 Interpolation point
CamTool
4-22
Configuration Manual, 12.2004, 6AU1900-1AB32-0BA0
Changing an Interpolation Point Position
To change the position of an interpolation point:
1. Select the interpolation point in the S diagram (distance diagram). The position of the
1. Select the interpolation point in the S diagram (distance diagram). The position of the
interpolation point is shown in the tooltip.
2. Move the interpolation point with drag&drop to the new position.
or
1. Double-click the interpolation point. The Interpolation Point Properties window appears.
2. Enter the new position in the Position tab and click OK. The interpolation point is
or
1. Double-click the interpolation point. The Interpolation Point Properties window appears.
2. Enter the new position in the Position tab and click OK. The interpolation point is
displayed at the new position.
Figure 4-17 Position tab
4.7.4
Delete interpolation point
Requirements
The cam is opened with SIMOTION CamTool.
Delete interpolation point
To delete an interpolation point:
1. Select the interpolation point that you want to delete.
2. Press the DEL key. The interpolation point is deleted and the representation of the cam
1. Select the interpolation point that you want to delete.
2. Press the DEL key. The interpolation point is deleted and the representation of the cam
adjusted in all diagrams.