Panasonic M0911SI0 -YI VQT3T61A (E) Manuel D’Utilisation
98
Cannot record even though
the memory card is inserted
correctly.
•
The write-protect switch on the memory card may be in the <LOCK>
position. The memory card cannot be recorded to if the switch is in
the <LOCK> position.
•
The remaining memory on the memory card may be extremely low.
Save the content onto other media and delete unnecessary data
from the memory card, or use a new memory card instead.
P15
•
The memory card may have been correctly formatted. Alternatively,
the format itself may be incompatible with this camera. Reformat the
memory card using the camera.
P13
•
8 MB to 16 MB memory cards cannot be used for shooting movies.
Page 11
of Vol.1
Recording stops by itself.
•
The memory card may not be compatible with video recording.
Always use a memory card compatible with video recording.
Page 11
of Vol.1
Editing
Cannot read the data on the
memory card.
•
Make sure the memory card has been correctly formatted.
If not, format the memory card using the camera.
P13
Cannot perform non-linear
editing.
•
Check the specifications of your computer and connection cable.
P64
Cannot dub onto an
external device.
•
Make sure the external device connected correctly.
P64
Displays
Something is wrong with
the time code display.
•
The time code display may not register a regular count if a clip is
played back in the reverse slow mode, but this is normal.
—
Playback
Cannot play back content
even when I press the play
button.
•
Make sure the camera is in the <CAMERA> mode.
Turn the POWER/MODE switch and confirm that the PB lamp <PB>
is lit.
•
Make sure that the playback format matches the data.
Match the playback format with the recording format of the clip.
P50
Mosaic-like noise appears
when fast-forwarding or
rewinding a clip.
•
This noise is inherent to digital video technology. It does not indicate
a fault.
—
Images do not appear on
the television even though I
have connected the camera-
recorder correctly.
•
Make sure that the input selector on your television is set to video
input.
Read the instructions of your television carefully and select the
correct video input connector for the camera.
—
Cannot hear any sound
from the camera’s speaker.
•
You may have turned down the camera’s volume control too far.
Adjust the volume level by pressing the <AUDIO MON/ADV> button
<+>.
P62