Panasonic SQt0375 Manuel D’Utilisation
14
SQT0375 (ENG)
Preparations
Charging the battery
The battery that can be used with this unit is DMW-BLG10E.
The battery is not charged when the camera is shipped. Charge the battery
before use.
The battery is not charged when the camera is shipped. Charge the battery
before use.
• Use the dedicated charger and battery.
1
Attach the battery paying attention to the
direction of the battery
direction of the battery
2
Connect the charger to the electrical outlet
• The AC
mains lead
does not fit
entirely into
the AC input terminal.
A gap will remain.
does not fit
entirely into
the AC input terminal.
A gap will remain.
Charging light ([CHARGE])
On: Charging in progress
Off: Charging complete
Off: Charging complete
If light is flashing:
• Battery temperature is too high or too low. We
recommend charging in a location where the
ambient temperature is between 10 °C and
30 °C (50 °F to 86 °F).
ambient temperature is between 10 °C and
30 °C (50 °F to 86 °F).
• Battery/charger connector is dirty. Clean with
a dry cloth.
• Charge the battery with the charger indoors.
3
Detach the battery after charging is completed
Charging time
Approx. 190 min
• The charging time indicated above is the time required for charging in case
when the battery is completely used up. The time required for charging differs
depending on conditions of battery usage. Charging takes longer in cases
when temperatures are either high or low and when the battery has not been
used for a long period of time.
depending on conditions of battery usage. Charging takes longer in cases
when temperatures are either high or low and when the battery has not been
used for a long period of time.