Panasonic VQT4T63 Manuel D’Utilisation
![Panasonic](https://files.manualsbrain.com/attachments/8f677e63fb64cbb6c62d09e6242996e7631380a8/common/fit/150/50/34d700d3fb727c767799b2da5cc474b219c0a4312e9e3044c99491a2fb9a/brand_logo.png)
- 49 -
Switch the quality and recording format of the motion picture to record in AVCHD.
≥ Set [REC FORMAT] to [AVCHD].
≥ Set [REC FORMAT] to [AVCHD].
/
/
*1
This option allows you to record in 1080/60p (1920
k1080/60 progressive), which is the highest
picture quality for this unit.
*2
Recording will have higher quality in the order of [HA], [HG] and [HE].
≥ Recordable time using the battery (
about approximate recordable time.
≥ When the unit is moved a lot or moved quickly, or when a fast-moving subject is recorded
(Especially when recording in recording format [MP4] or recording mode [HE]), mosaic-type noise
may appear at playback.
may appear at playback.
It is possible to continuously record motion picture to an SD card when there is no space available
in the built-in memory. (It allows you to record only to SD card from built-in memory.)
≥ Set [MEDIA SELECT] to [Built-inMemory].
≥ Set [REC FORMAT] to [AVCHD].
≥ Insert an SD card.
in the built-in memory. (It allows you to record only to SD card from built-in memory.)
≥ Set [MEDIA SELECT] to [Built-inMemory].
≥ Set [REC FORMAT] to [AVCHD].
≥ Insert an SD card.
≥
is displayed on the screen.
will disappear when space in the built-in memory is gone
and the recording to the SD card starts.
≥ Relay Recording can only be performed once.
≥ Combine the scenes that were relay-recorded using the [RELAY SCENE COMBINE] into
≥ Combine the scenes that were relay-recorded using the [RELAY SCENE COMBINE] into
the SD card. (
≥ Once you have performed [RELAY SCENE COMBINE], you can use the Relay Recording
function again. If the [RELAY REC] is set to [ON] without performing the [RELAY SCENE
COMBINE], a message is displayed. You will be able to perform Relay Recording by selecting
[YES], but you will not be able to perform the [RELAY SCENE COMBINE] after that.
COMBINE], a message is displayed. You will be able to perform Relay Recording by selecting
[YES], but you will not be able to perform the [RELAY SCENE COMBINE] after that.
[REC MODE]
: [RECORD SETUP]
# [REC MODE] # desired setting
[1080/60p]
*1
:
Set the recording mode to 1080/60p.
[HA]/[HG]/[HE]
*2
:
Set the recording mode to 1080/60i.
[HA]/[HG]/[HE]
*2
:
Set the recording mode to 1080/60i.
[RELAY REC]
: [RECORD SETUP]
# [RELAY REC] # [ON]