Panasonic PV-DV953 Manuel D’Utilisation

Page de 92
81
Video cannot be played back even when the [
1] Button 
is pressed.
Is the [VCR] Lamp on? If the [VCR] Lamp is not on, the 
playback function cannot be used.
Mosaic-like noise patterns appear on images during 
Cue, Review or Slow Motion Playback.
This phenomenon is characteristic of digital video systems. It 
is not a malfunction.
Although the Palmcorder is correctly connected to a TV, 
playback images cannot be seen.
Have you selected Video Input on the TV? Please read the 
operating instructions of your TV and select the input that 
matches the input jacks used for the connection.
Playback image is not clear.
Are the heads of the Palmcorder dirty? If the heads are dirty, 
playback image will not be clear.
No sound is played back from the built-in speaker or 
headphones of the Palmcorder.
Is the volume too low? During playback, continue pressing 
the [PUSH] Dial until the [VOLUME] Indication appears. 
Then, rotate the [PUSH] Dial to adjust the volume.
Different sounds are reproduced at the same time.
[12bit AUDIO] on the [PLAYBACK FUNCTIONS] Sub-Menu 
of the [VCR FUNCTIONS] Main-Menu has been set to [MIX]. 
As a result, the original sound and sound that was recorded 
by audio dubbing are played back together. It is possible to 
reproduce the sounds separately.
The original sound was erased when audio dubbing was 
performed.
If you perform audio dubbing on a recording done in [16bit] 
Mode, the original sound will be erased. If you want to 
preserve the original sound, be sure to select [12bit] Mode at 
the time of recording.
Sounds cannot be played back.
≥Although a Cassette with no audio dubbing is being played, 
is [12bit AUDIO] on the [PLAYBACK FUNCTIONS] Sub-
Menu of the [VCR FUNCTIONS] Main-Menu set to [ST2]? 
To play back a Cassette with no audio dubbing, 
[12bit AUDIO] must be set to [ST1].
≥Is the Variable Speed Search Function working? Press the 
[
1] Button to cancel the Variable Speed Search Function.
The recorded picture on the Memory Card is not clear.
Do you have [PICTURE QUALITY] on the [CARD SETUP] 
Sub-Menu set to [NORMAL] or [ECONOMY]? If recording is 
made when it is set to [NORMAL] or [ECONOMY], a detailed 
image may show a mosaic pattern. Set the 
[PICTURE QUALITY] to [FINE]. (
43)
Card PhotoShot playback pictures do not look normal.
There is a possibility that the images are damaged. To 
prevent the loss of image data, we recommend that you back 
images up on a Cassette or personal computer. (
Even if a Card is formatted, it cannot be used.
There is a possibility of damage to either the Palmcorder or 
the Card. Please contact Panasonic Call Centre.
If you are experiencing one of the following problems with your Digital Palmcorder, it may be something you can correct yourself. 
Check the list below for Problems and Solutions.
Problems
Solutions
PV-DV953P.book  81 ページ  2003年1月16日 木曜日 午後6時54分